DIY Thread Holder

I’ve been doing  a lot of sewing recently, and as a result I’ve collected a lot of thread! I could no longer close the lid on my sewing box so I knew I needed a better storage solution. This yellow thread holder stores a lot (181 spools to be exact) and it’s beautifully colourful 🙂 Now I just need to fill up all that empty space! I decided to use nails as bobbin holders on the bottom half only because I usually have much more thread than bobbins. And here’s how I did it…

You will need: A large rectangular piece of MDF (mine’s 1220 by 606mm and it’s 6mm thick) 10 metres of 6mm dowel sticks, a drill and a 6mm drill bit, a saw, a pack of thin nails, wood glue, 2 picture mounts and screws, 2 picture hooks and some paint (I used spray paint, but in retrospect regular paint would have been better.)

To begin with, saw your piece of MDF exactly in half. / Decide where you want your spools to go. I drew lines 2.5 inches apart both horizontally and vertically along one half of the MDF. / Drill holes through the MDF at each point where the lines you drew intersect. If you haven’t used a drill before, get someone to help you! / Saw your pieces of dowel into 5.5cm long strips.

Squeeze a little wood glue onto the end of each strip of dowel and insert them firmly into the holes you drilled. / Once the glue is dry, cover the back of the MDF with wood glue and adhere this to your second piece of MDF (not pictured.) Whilst drying, I placed jam jars over the strips of dowel and balanced heavy books on top of the jam jars. That way, the MDF will be sandwiched firmly together when dry and you won’t snap any of the dowel strips! Once this is dry, paint the entire thing. / When the paint is dry, hammer nails in between the dowel strips. These will hold bobbins! I only hammered nails onto the bottom half, since I usually have more spools of thread than bobbins. / Screw picture mounts onto both top back corners.

Hammer your picture hooks into the wall and hang up your thread holder!

This project ended up taking me a long time because the wood needed so many layers of spray paint. Note to self, use paint brush paint in future! I feel like I’ve done a lot of DIY posts featuring this corner of my room lately, so hopefully that means it’s nearly finished. I’ll hopefully move into my flat in Edinburgh next month, and I’ve been doing  lot of furniture browsing and decorating planning. I’m so excited!

Advertisements

7 thoughts on “DIY Thread Holder

  1. Fab idea Jess! Looks great! I have nowhere near that amount of thread haha, looks like you’ve got room for every colour you might possibly need 🙂 xx

  2. Great work – the simple ideas are often the most useful – my hubby makes picture mounts etc – I’ll have to see if he can make me something similar to this

  3. Ummm ok, I only just bought my sewing machine but I NEED one of these !! It’s so frickin awesome !! And I love the colour you chose

Thanks for taking the time to leave a comment! I love reading your thoughts :)

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s